The manufacturer of thise is KCPI.
The girl I reached said to try either LG or Apex codes, if you have those from the manual for your remote.
Waths the remote code for pixel
use magnavox code 1053
try code 1071. It worked for a sharp aquos 60" tv.
Most Seiki tv use Samsung parts try codes from them
1343 is the Visio code.
According to Magnavox, there are no known codes for the u-verse remote for certain models, including Projection TV Model 50ML8105D. I use My original Magnevox Remote for the TV and the uverse remote for the Channels and on-off.
TVs work with remotes because TVs have an IR sensor on the front bezel for receiving a signal from a remote control. Your Asus monitor is NOT equipped with such a sensor to receive commands from a remote control. It will NEVER work with TV remotes. Not in a million years. Don't even think it.
I just used a Zenith code 1255 for my Toshiba HDTV and it worked! Good Luck!
http://alanweinkrantz.typepad.com/3screens/2007/12/how-to-program.html or try http://www.ehow.com/how_4786661_program-att-uverse-remote-control.html
There are currently no codes available for an Affinity TV. Below are the steps for a Power Scan which can be used to try and scan the code in. Power Scan to TV: 1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release. 2.) Press and release the red power button, then press the Up arrow button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off. 3.) When the power turns off, press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.
11531
Try 11381