Brushed steel and brushed nickel are popular finishes because they are good-looking and long-lasting. Both have similar surface qualities, because the same method is used to "brush", or finish the surface of the metals. However, the metals themselves have a different color: while they are both silvery, steel appears more blue (colder) than nickel, which has a more golden (warmer) hue. This is why nickel is generally used in period decor, while steel conveys a modern feel. They both react differently to magnets, too, so if you require a surface on which to hang Junior's latest art project, you'd better bring a small magnet to the appliance store to be sure. An important point to ascertain from the sales rep is whether the brushed steel you are looking at is in fact stainless steel - superior in almost every way to cold-rolled (non-stainless) steel, but much more expensive, and also non-magnetic. Stainless steel is not reactive to most of the damaging substances it would encounter in a kitchen or bath, for example. Also note: the brushed finish on these metals is a practical solution to their malleable nature - they will scratch, dent and show fingerprints. Newer brushing methods claim to reduce fingerprints, but let the buyer beware. In fact, bring Junior with you to the store and let him put his little hands all over the appliances. "Stainless" does not mean "maintenance-free", and isn't the idea to reduce your work? Both materials do make lovely and versatile finishes, and will last for decades.
The Satin Nickel finish is nickel plating on brass that has been lacquer coated and made to appear dull. Satin Nickel is sometimes referred to as brushed nickel. It is similar in appearance to brushed stainless. Brushed implies the parts has been "Wire Brushed" and directional lines of abrasion can be seen. Satin Nickel is electro-deposited on the part from a Nickel salt solution usually Nickel Sulfamate. The electro-deposit is "Satin" or "Velvety" in appearance and shows no marks or lines from abrasion. Satin and brushed are the same finish. Satin and brushed are the same finish.
No. While their color is silver metallic, they are not the same looking. Brushed nickel has a much softer "deeper' sense to it and more of a grey color. Brushed silver will maintain more of a shine. For an example, you only need to look at your change. A nickel has a softer look than even an old dime. If you really want them to look like they match, you are going to have to use all brushed silver or all brushed nickel, because they just look different. Would I use them together? Not if I could get by without it.
No. One is nickel, usually plated over a different base metal. The other is stainless steel. The object is usually made just of the stainless steel, with no plating. They can look similar in appearance, but the nickel plating can eventually wear off.
I'd say their about the same in experience but steel wears down the frets so if you want to keep the guitar forever and don't have a lot of money stick to nickel.
It isn't made of silver. Canadian nickels were made of 99.9% nickel for many years. From 1982 to 1999 the coin was made of 75% copper and 25% nickel, the same composition as US nickels. Starting in 2000 the Royal Canadian Mint began phasing in production of the coin using nickel-plated steel. Both steel and copper-nickel coins were produced until 2006 when all production was changed over to plated steel.
Buffalo nickels were never struck in steel. All were made from the same cupronickel alloy used for modern Jefferson nickels. Please see the question "What is the value of a 1936 US nickel?" for more information.
It attracts the exact same thing as ordinary magnets do. Ex.: steel, iron, cobalt, and nickel
The stainless is the same material throughout, while the polished nickel is probably nickel on top of brass. There'll be a slight difference in sheen, and the nickel can eventually wear off to expose the yellow base metal underneath.
Dean Markley Blue Steel I'd go with, if not any brand in general that's steel although Nickel gives you about the same sound but isn't as bad on the frets.
Surgical Steel is fine for surgery. It contains Nickel. Many people are allergic to nickel. Still, for as short a period of time as it will be used, it should not cause any problems. People are not allergic to Titanium. It is safer to leave in your body.
when mining and refining nickel in WA , is this process the same as ultramafic nickel
In the United States, 5 cent pieces (or "nickels") are composed of an alloy of 75% copper and 25% nickel. In Canada, depending on their dates the coins can be made of 99.9% nickel, the same alloy as US nickels, or nickel-plated steel. The euro 5-cent piece is made of copper-plated steel. The Australian 5-cent coin is made of the same alloy as US nickels.