0
No it does not.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you add engine sealant to an engine?
add it to the oil.
Do you change oil before adding a engine sealent?
Engine sealant????? Total waste of money and will do nothing but possibly harm your engine. Do not pour any engine sealant or additive in your expensive engine.
Does AutoZone sell engine block sealant?
Shop for BlueDevil/16 oz. pour-n-go head gasket sealant 00209 with confidence at AutoZone.com.
Is rtv sealant necessary when replacing intake manifold gasket in 1994 Chevy 5.7 350 engine?
You need the sealant on the ends where the supplied gaskets don't cover fully.
How do you replace the oil sump sealant in your Toyota 2c engine?
How do you seal a leaking oil sump in 2c toyota diesel engine
Can you use a metallic sealant such as car-go sealant to temporarily fix a leaking intake gasket on your 1996 Olds Ciera?
It is possible, however like you said it is temporary. It depends on how bad the leak is. I would suspect it would work, typically the whole will be small enough to work with that type of sealant.
Do you need to use sealant plus gasket when attaching fuel pump to Chevrolet 350 engine block?
If both surfaces are clean and flat and you are using a new gasket, no sealant is necessary.
Is head gasget sealing products safe?
Some head gaskets come with a coat of "Copper coat" sealant already on it. You can use copper coat on a head gasket safely. I prefer "Indian Head Shellac" myself. Just be sure to completely clean the heads first, and apply the sealant liberally. If you use too much, you can damage your engine by the sealant leaking into the engine itself.
Will the gasket sealant work if the car barely runs?
Yes, just be sure it will withstand high temps.
Will gasket sealant work for a blown head gasket on a 96 Honda?
In your dreams bubela! Buy a new gasket.
Does a water outlet housing take a gasket for a 94 Toyota Tercel engine models or do you use sealant.?
toyotanation.com is a good place to ask!
What type of sealant should be use on a brake hose?
No sealant is used in that application.
