0
No, it does not matter if the cable wires cross over. It should not cause any problems if they cross over. However, there are several products that allow them to cross over to add on benefits.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How does cross over cable look?
There are several types of cross-over cables. The basic idea is to connect two devices that are alike - for example, connection a router to another router. both of these devices use the same wires in a cable (ex. a CAT6 cable) to send and receive data. so, in order for them to communicate you have to cross the wires so that the send wire on one side goes to the receive pin on the other. To summarize, all you do is switch the appropriate send and receive wires in a cable.
What is the different between cross over and normal patch cable?
In a normal patch cable the wires are the same on both ends. In a cross over cable the transmit and receive pairs are reversed so that the wire in position 1 goes to 3, and 2 goes to 6.
How do you know that your crossover cable is good?
You can use an ohmmeter to test the continuity of all wires. Alternately, you can put it in place of a known working cross-over cable and see if the network connection still functions. Remember that many modern network devices detect whether the cable is straight or cross-over, so perhaps you don't even need a cross-over.
Which cable connects directly to two PC's?
A cross-over cable directly connects two PC's without the need for a device such as a switch. The cross-over cable works by having one end's pins in a standard order and the other end swaps the transmit and receive wires. RJ-45 UTP CABLE IS ACTUALLY USED.
What kind of cable is needed to connect a switch to a switch?
cross over cable
What type of monitor cable was connected to the laptop?
Ethernet cross-over cable
How can one identify a cross-over cable?
Match up the two ends of the cable. Look closely at the color coding of the pins at both RJ-45 connectors. If the same colors are used in the same pin positions then the cable is a straight-through cable. If they are reversed at both ends then it is a cross-over cable.Sometimes the cable will be marked that way on the outside covering of the cable. Look for the words "cross-over cable".
What is the type of network called that connects two computers directly together using a cross-over network cable?
If both PCs have ethernet cards, the best cable to use would be a crossover cable. A crossover cable is almost the same thing as a regular ethernet cable, except the wires inside the connector are reversed on one end. This reversing of the wires allows you to connect a crossover cable between two PCs without any other network equipment like a switch or a hub.
When would you use a cross-over cable?
A cross-over cable is used when connecting like devices together. Such as networking a computer-to-computer, a switch-to-switch, router-to-router, etc. The reason for this is because each RJ-45 port on the end device has wires which listen and send data. If you tried to connect a straight-though cable to network these devices, they would both talk on the opposite ends of the wires. For example, PC-1 will send data and PC-2 will receive that data on its "send" wire, instead of the "receive" wire.
Can a cross over cable be used to connect two unlike network devices such as a PC and a hub?
In general, no, you would not use a cross-over cable to connect a hub/switch/router to a PC. This is because the device itself has cross-over circuitry built into it, and if you used a cross-over cable you would be reversing that process. The net effect is that the transmit signal would connect to another transmit signal, when it should be connected to a receive signal.
What is the purpose of a crossover RJ45 cable?
You can connect 2 PC`s without the use of a switch with a cross-over cable.
What type of cable do you use for network of two computers?
you can use any of the following cables: 1) Cross Over cable 2) LAN cable 3) Ethernet cable
