In a normal patch cable the wires are the same on both ends.
In a cross over cable the transmit and receive pairs are reversed so that the wire in position 1 goes to 3, and 2 goes to 6.
The difference between a cross cable and a state cable is that a cross cable, or crossover cable, is used specifically to connect two of the same devices.
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
Cross section is the surfave area of the cable if you imagine it cut into ... gauge and diameter are basically the same thing, although the unit of measurement are different.
RJ-45 Cross Cable.
Because they are considered to be "Like" devices
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
Dihybrid cross
cross cable
crossover cables must be used between 2 devices from the same level like (pc & pc - Pc & router - router & router) but strait through cable used between 2 different levels like (pc & switch - router & switch )
There are several different cables that you can use for this process. They include a cross over cable or an uplink.
cross cable
Cross cable.