Want this question answered?
Reversing polarity is not possible with an ac motor. Some do have wiring that will allow you to change rotation. The type and model of the motor can tell you if it is reversible.
Permanent magnet field motors. With a these motors, a permanent magnet is used to replace the field coil. DC power is connected via the brushes, to the armature only. Reversing the polarity, will cause the motor to reverse its direction of rotation. It is very common to use a switch to intentionally reverse to the polarity, to allow reversal of the motor if desired.
Reverse the field terminals.
The motor will spin the direction that the positive lead is on. So if the shaft is pointing towards you, you will need to put the positive lead on the left side to make it turn counter clockwise.
yes by reversing phases
Reversing polarity is not possible with an ac motor. Some do have wiring that will allow you to change rotation. The type and model of the motor can tell you if it is reversible.
Its a motor that will do some work if you feed it some DC voltage. Reversing the dc supply voltage polarity will make it run in a reverse direction. The electric windows in your car is a good example of a DC motor's usefulness. The window up-down switches simply reverses the + and - polarity of the 12 volt vehicle supply to the window motor to make it take the window up or take it down.
Permanent magnet field motors. With a these motors, a permanent magnet is used to replace the field coil. DC power is connected via the brushes, to the armature only. Reversing the polarity, will cause the motor to reverse its direction of rotation. It is very common to use a switch to intentionally reverse to the polarity, to allow reversal of the motor if desired.
This assumes you have a 12 volt direct motor. You should be able to simply reverse the wires leading to the terminals. There should be two wires going to the motor. Change them around.
If you managed to find any leaded gas then No, it will not hurt anything.
With the starting winding disconneted the motor will start up in whichever direction it is spun. To make the starting winding operate the other way, it needs an inductor in series insead of a capacitor. Details depend on the motor, but the reactance of the inductor should match that of the capacitor.
If you are talking polarity. DC motors automotive application run poss to neg. But any dc motor can reverse by changing polarity.
Reverse the polarity of armature windings of the motor.
yes sir
Reverse the field terminals.
Check your motor mounts.
the magnitude is decided by the amount of flux, number of conductors, speed of the motor and the type of the winding used. the polarity is decided by the direction of rotation of the motor and the direction of armature current flowing in the motor.