Yes it does it will also depend on the material of the tile and exactly what you mean by small tile a 34 will probably be more expensive than 6 because of the difficulty of laying the material evenly.
£167.97p
Slate tile requires more prep and skill to install, which usually makes it more expensive to install. It will very by region, but $7 to $9 per sq foot.
Ten flys
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
You should NEVER install tile over laminate. Pull up the laminate (which is very easy) and install the appropriate subfloor, then install tile on that
By the foot, carpet is about $2 & tile is about $5.
£167.97p
Slate tile requires more prep and skill to install, which usually makes it more expensive to install. It will very by region, but $7 to $9 per sq foot.
For a professional to install marble tile in a 10 x 10 foot space, it will cost around 1,500 dollars. If you do it yourself, it will cost about $550 for the same amount of space.
tile is usually 12"x12", but you need to factor in the cost of grout and labor if you are not doing it yourself. $2.75/tile x 528 tiles = $1452 install @ $5-10/SF = $3000-5000 depending on conditions and material required
from 75c. to 2,50 dollars
The labor cost to install vinyl composition tile should cost between $.75 and $1.00 to have installed. Note that the tile needs to be polished and waxed after installation that will run between $ .15 and $.25 per square foot. Prices can range based on the size of the job. The more you buy the more you save.
Average in Southeast is $3 - $3.25 per square foot. Anything better than that is a good deal. I install tile in the Opelika, AL area.
Ten flys
Cost for tile installation in the southeast is usually around $3 per square foot anything better than that is a deal. I install tile in the Opelika, AL area.
It is best to remove the vinyl tile. If it is not on cement and is on wood you can install cement backer board. Be sure to put thin set under the board. If you spend the money and time to install ceramic tile and the vinyl tile comes loose all that $ is down the drain What is the best tile cement to use and this cement tile can be installed on vinyl tile and install ceramic tile on it
Travertine is no more or less tile than ceramic or Porcelain in that application, although it may actually be lighter.. anyone that can install tile on a ceiling could do Travertine..