Chevy didn't make a S-10 in 1978.
The modulator valve on a 2007 automatic 4.2 liter transmission goes on the underside of the transmission. You will need to jack up the vehicle in order to reach the valve.
On your 1989 Ford Ranger : The vacuum modulator valve is on the passenger side of the A4LD automatic transmission ( it might be behind a heat shield )
That is a 350 engine.
No there is not.
in the transmission valve body
i need to know how to change an automatic transmission mount on a 2000 chevrolet
Automatic transmission, on the left side (drivers side) of the transmission. Standard transmission, on the clutch peddle assembly.
Listed under the hood on a placard and in the owner's manual.
Yes it will fit right in there and hook right up.
The idle on my 1995 Chevy Cavalier stays at 600rpm's when i check it with the scanner. Hope this helps BE SAFE dirt420ba
no
I'm not a mechanic / technician but I read once that the modulator valve for the automatic transmission has a vacuum line connected from the valve to the engine and that transmission fluid can be sucked into the engine if something goes wrong with the valve