no it has dic brakes
It has ABS.
Bring to ashop that has an ABS scanner to determine the problem
were abs anit-lock brakes system
The easiest method would probably be to remove the fuse, if it's a dedicated circuit.
Most likely because of a problem with the ABS system, which could be expensive to fix. It could also be caused by low brake fluid.
It means that the ABS computer has detected a fault with the ABS circuit, meaning that there is a problem with a wheel speed sensor, the ABS computer or the actuator. You'll need to have the ABS diagnostic codes read to find out what the computer thinks is wrong.
The most common cause would be a Low Brake Fluid situation in the Master Cylinder. Also, the ABS system has a balancing valve in the Fluid circuit. If the valve is not in the normal position for some reason, the ABS System should see this as a fault and turn on the light.
ive got three ways that might help 1) see if it says abs on the brake pedal 2) check the owner's manual 3) find something that you can slide on such as ice snow or maybe gravel (not sure where you live) and slam the brakes if they lock up then you dont have abs.
Remove the abs fuse under the hood in the fuse box
The ABS light is on because the ABS module detects a problem with the ABS system. Until the problem is fixed the ABS function will not operate and the light will remain on.
ABS Capital Partners was created in 1990.
Fix the ABS so it works. Unhook the battery for 5 minutes.