Yes it very much depends upon what type of soils are in the region. In some very dry locations the ground wire is strung along with the rest of the pole wires from pole to pole. In very gravelly soil conditions there is no grounding medium no matter how deep the ground rods are placed. Other places that give trouble is solid rock installations.
Voltage on ground can mean an open ground. It can also mean (high) current on ground, due to a ground fault such as reversed neutral and ground.
On a three phase system with a line to line voltage of 13800, a wye connection will give you a voltage of, 13800/1.73 = 7977 volts to ground.
There should be no voltage on the neutral wire to ground. This is a serious situation. Call a qualified electrician to check this out.
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
There are two types of connections in three phase systems. One is a delta connection where there is no connection to ground, so you should not get any voltage to ground. This is classed as a three phase three wire system. In this type of system any one of the phase wires could become grounded and no one be the wiser. Code requires that grounding lights be added to a delta system to visually show what the phase condition is in relationship to ground. The other type of system is a wye or star point connection. This is classed as a three phase four wire system. In this type of connection the coil ends are all joined together and grounded. You would have voltage between the phases and a lower voltage to ground. The voltage to ground would be the phase voltage divided by 1.73.Yes. If there is no voltage between a hot and a ground, either the hot isn't really a hot or the ground isn't really a ground.AnswerThere is always a potential difference between a line conductor and ground, regardless of whether it is a three-wire system or a four-wire system. This is due to the capacitance between line and ground.
The voltage regulator for the alternator is in the computer. If the voltage regulator in the computer does not work, you can add an external voltage regulator and then your battery will charge normally. Make sure to check the ground on the computer. If the ground is bad on the computer, then the computer will not regulate the voltage to the alternator properly.
He simply dug into the ground and found sparks of electricity. He dug more and found huge amounts of electricity and he discribed it as voltage. Actually Alexzander Volta looked deeper in chemicals and discovered that it created it electricity and called the measurement of it voltage.
If you are reading a voltage it is the drop across the resistance to ground. To get rid of the voltage get the resistance lower. This can be accomplished by installing more ground rods to the grounding system. Utility companies usually like 3 ohms to ground or less.
Voltage on ground can mean an open ground. It can also mean (high) current on ground, due to a ground fault such as reversed neutral and ground.
Phase to Phase voltageCorrection to the above answer:There is no such thing as a 'phase-to-phase' or 'phase-to-ground' voltage. The correct terms are 'line-to-line' (or 'line voltage') and 'line-to-ground' (or 'phase voltage'). Transmission-line voltages are line-to-line (or 'line') voltages.
5 volt supply, sensor ground and signal voltage.5 volt supply, sensor ground and signal voltage.
Voltage is the potential difference to the ground. By convention, ground potential is zero volt.The above answer is incorrect. 'Voltage', by definition, is potential difference. It has nothing to do with being measured with respect to ground -in fact potential difference (voltage) cannot be measured with respect to anything.
its 25mX16m
On a three phase system with a line to line voltage of 13800, a wye connection will give you a voltage of, 13800/1.73 = 7977 volts to ground.
There is such a thing, what is your question?
There should be no voltage on the neutral wire to ground. This is a serious situation. Call a qualified electrician to check this out.
The length of a cricket ground is 22 yards known as a CHAIN