The question should be (I guess)..."Which would have a greater emulsifying power in 'hard' water, soaps or detergents?". The answer to that question is certainly the detergent. (Further, fyi, shampoos are great emulsifiers in hard water compared with the two.)
*Please see molecular structures of soaps and detergents to understand how and why detergents emulsify more than soaps.
To allow suspended solids to remain in suspension. Emulsion paint for example contains fine particles of pigment in suspension in water. The emulsifying agent prevents the pigments settling to the bottom.
It is an emulsifying agent allowing lipids and water based fluids to be mixed together into (pharmaceutical) preparations
Soap contains particles that have a polar end and a non-polar end. These particles are able to attach to oil particles and to water particles, enabling the oil to dissociate in the water and disperse. In this way, soap acts as an emulsifying agent.
Water has.
Soft water is better solvent
This mixture is an emulsion.
Water and oil form a colloidal dispesion.
To allow suspended solids to remain in suspension. Emulsion paint for example contains fine particles of pigment in suspension in water. The emulsifying agent prevents the pigments settling to the bottom.
Sodium Choleate- it is a bile salt that serves as an emulsifying agent; which aids in the suspension of triglycerides in water. I'm not going to lie, I do not know how or why, but I just did it in my chemistry class last week.
The power of a lens depends on the differences in the refractive indices of the environment and the lens material. A glass lens immersed in water will loose power (a positive lens will focus at a greater distance). (This is for normal glass with refractive index greater than water - there could be glasses with refractive index less than water in which case the lens would gain power)
It is an emulsifying agent allowing lipids and water based fluids to be mixed together into (pharmaceutical) preparations
An emulsifying agent is a substance that helps an emulsion become more stable. An emulsion is usually a mixture of two products such as oil and water that do not mix together or that are also referred to as immiscible. By adding an emulsifying agent to the mixture, they cause the oil to be broken down into smaller pieces that can then be dispersed throughout then water. This is then what becomes known as an emulsion.
if you have have water mixing with the oil then your cylinder head gasket might need replaced if it is not overheating just give a good run, when the oil heats the water will evaperate
Water is greater.
The ability of cells being allowed to swim into and out of the loop's water film rather than scraping the agar surface of growth and then emulsifying cells on the slide is due to its morphology. The path chosen is due to the cell's make up.
When the water is falling from height. The more the falling speed, the greater the energy.
A lotion is usually an emulsion - similar to, for example, mayonnaise. An emulsion is made of two liquids that won't normally mix (such as oil and water) and a third chemical is added that enables the other two to join together. This makes a creamy mixture. This third chemical is called an emulsifying agent.In the case of a lotion, the oil is often palm oil and the second is usually just water. Any of a number of different emulsifying agents (such as emulsifying wax for example) are added to join the oil and water. Scents and perhaps also medicines are then added, as needed, to make whatever particular lotion is required.