yes
Latching current is the current flowing between anode to Cathode when thyristor is turned on using gate pulse. If the gate pulse is removed before the required min amount of latching current value is not reached thyristor will turn off. To keep the thyristor in on state the gate pulse duration should be so adjusted that the min latching current value is reached before it ends.
CT ratio is the ratio of primary (input) current to secondary (output) current. A CT with a listed ratio of 4000:1 would provide 1A of output current, when the primary current was 4000A.
The current reserve ratio for net transaction accounts totaling more than $43.9 Million is 10%. Source: http://www.federalreserve.gov/monetarypolicy/reservereq.htm#table1
The current ratio is an accounting measure of liquidity and is defined by: Current Assets / Current Liabilities In order to increase the current ratio, either increase current assets (e.g. cash, inventory, accounts receivable) or to decrease current liabilities (e.g. accounts payable, notes payable).
The ratio of output windings to input windings determines the ratio of output voltage to input voltage. The ratio of current is the inverse.
we know that ratio of holding current to latching current in scr is 0.4.
Latching current is the current flowing between anode to Cathode when thyristor is turned on using gate pulse. If the gate pulse is removed before the required min amount of latching current value is not reached thyristor will turn off. To keep the thyristor in on state the gate pulse duration should be so adjusted that the min latching current value is reached before it ends.
It depends from which source accounts payable are clearing if it is from current asset then it will reduce the current ratio
It depends on the nature of business as well as the capital intensity of the business if business is capital intensive the high current ratio required otherwise it is not required to maintain high current ratio
Formula for current ratio is as follows: Current ratio = Current assets / current liabilities
the two ratios that measure liquidity is acid test and current ratio. the acid test ratio is current assets- stock/ current liabilities the current ratio is current assets/ current liabilities
current ratio and acid test ratio are examples of liquidity ratios'. current ratio is current asset's/ current liabilities. acid test ratio is current assets- stock / current liabilities.
The ratio between current assets to current liability is called "Current Ratio".
Current Ratio = Current Assets / Current Liabilities
The primary current on a loaded transformer depends on the secondary current, which is determined by the load. So, if you know the secondary load current, then you can use the turns ratio of the transformer to determine the primary current:Ip/Is = Ns/Np
current ratio = current asset divided by current liability
no they are not the same. the current ratio is current assets/current liabilities. but liquidity ratio or acid test ratio is current assets - stock/current liabilities. liquidity ratio shows you how able a business is to pay off its debt when stock is taken out of the equation.