Tile floors do not require a floor polisher. You must sweep and mop them regularly but there is no need to polish them.
Yes, but you should be careful when polishing ceramic tile floors because they can become slippery. You can buy a floor polisher from sites like Amazon or rent them from Lowe's or The Home Depot.
The Vacuum Cleaner is used specially in Carpeted floors and maintaining the floor clean just like broom and map while the Floor polisher or Floor buffer is used in non-carpeted floors such as hardwood,marble, tile or linoleum and keeping the floor shine and glossy.
Yes. I have done it. First have the hardwood floor installed. After the hardwood floor is installed have the tile installer install the tile. The reason for this is that the hardwood is very firm and has little room for adjustment. An excellent tile installer can adjust the height of the tile to be flush and level with the hardwood floor with little or no seem. When its done it looks beautiful.
No, plywood alone is not strong enough for ceramic tile. These floors require a very sturdy subfloor at least 1 1/4" thick before the tile. This requires either using cement board or a pored mudbed.
A church has a rubber tile floor that needs serious cleaning. Can I steam mop it?
You can put the newer style floating wood floors onto a floor with tile. Also, if it is old VCT tile, there are glues that will allow you to use their product to glue the wood to the floor. Unfortunately, nail down wood is not acceptable.
To effectively clean tile floors using vinegar, mix equal parts of vinegar and water in a spray bottle. Spray the solution onto the tile floor and let it sit for a few minutes. Then, scrub the floor with a mop or brush and rinse with clean water. This method is effective in removing dirt and grime from tile floors.
Yes a vacuum works very well on tile floors, just set it on the floor setting. I always vacuum my tile floors before I wash or mop them. The vacuum picks up the loose dirt and and hair from the floor, and it makes it much easier to mop and clean.
You can get a high gloss floor finish for asphalt tile floors by going to a good home improvement and DIY store such as Lowes. An example of such a product that is available from Lowes is the Zep Commercial 5-Gallon Wet Look Floor Polish.
One can buy floor materials from the Floors Direct shop. For example, one can buy wood, tile, linoleum, and other various floor materials from the Floors Direct shop.
A pH-neutral vinyl floor cleaner is the best choice for maintaining the cleanliness and shine of your floors.
The best method for effectively cleaning vinyl tile floors using a vinyl tile cleaner is to first sweep or vacuum the floor to remove any loose dirt or debris. Then, dilute the vinyl tile cleaner according to the manufacturer's instructions and mop the floor with the solution. Be sure to rinse the floor thoroughly with clean water afterwards to remove any residue.