Sometimes the center of the prop breaks loose and slips or the splines get stripped. Also check to make sure you have the correct pitch prop for that motor and it is fastened securely.
1991 evinrude 9.9 engine, could you tell me the gas oil ratio please
As of January 2011 Evinrude does not. In 2010 they came out with a 15 hp E-Tec outboard motor. This is basically there 25hp model regulated to do no more than 15hp. If you look at these motors side by side, there the same size and weight. The weight of the 25 hp E-Tec 20" shaft is between 150 lbs and 183 lbs, depending on the model. The problem is that the 15 hp models weight the same and this too heavy for some boats transoms. In my opinion it's a joke, Evinrude did it so guys could by a smaller matching "kicker" outboard for trolling, next to there bigger higher outboard motor. Lets hope that in the very near future they will come out with a 9.9 or a 15 hp E-Tec that will have the lower weight. These outboards should only be weighing in the neighborhood of 80- 115 pounds. Hope this helps! Chris
if you ran it out of the water the pump could have burnt up which in turn would seize up the engine.....you may also have not mixed the fuel to oil ratio correctly which could also cause it to seize......it could also be from sitting, if it sat for a long time the cylinder could have rusted or corroded causing it to lock up
It depends. It could have 12 horsepower or 1592 horsepower.
Many customers on numerous websites have rated evinrude propellers 5 starts out of 5 for quality. However, evinrude parts have been rated a 6 out of 10 in certain long term tests. I am sure that there are probably other brands that are better than evinrude, so I could not say that they are the "best."
In 2002 it could either have a 2.2 L with 140 horsepower or 3.4 L with 170 horsepower.
The Corliss engine could produce 2,500 horsepower.
Depending on which engine it has, horsepower could range from 300HP to 435HP.
Evinrude USA can repair motors for you and you can check out their home page for more information. Aside from repairing, they also offer boat motors and outboards for sale at an affordable price.
The Cummins N14 engines could be had in horsepower ratings from 310 to 525 horsepower. The red top engines were those rated at 435 horsepower or higher.
could you please tell me the weight of a 1980 mercury 80hp 2 stroke outboard motor
The length, and depending on horsepower, it could be larger for the higher horsepower bike.