answersLogoWhite

0


Best Answer

The fuses are pretty straightforward and it's pretty clear when one has blown. The bulbs are a different matter. The tiny filaments will sometimes fool even the sharpest eyed person. I would replace them first. If that doesn't fix it, then I would suspect the wiring where it passes from the body into the liftgate itself and is subject to constant flexing. Good luck.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Ford 2002 Focus wagon the back licence plate light and rear high mounted brake lights are not working bulbs fuse appear okay?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What type of lights are mounted on walls?

Lights that are mounted on walls are called sconces.


What is the difference between flush and semi-flush mounted ceiling lights?

The difference between flush and semi-flush mounted ceiling lights is that one of them can be mounted on the ceiling and the other one can be mounted elsewhere.


My Back lights not working on 2002 peugeot 405 any ideas wot fault is?

If the lights work a little but appear dim then i would suggest a dodgy earth?


Signal lights not working?

signal lights not working.


If the fuse is good and the bulbs are good what else can be wrong with the brake lights not working on a 2004 Passat?

It could be the brake light switch, usually mounted on the brake pedal.


Do trailers need mounted turn signal lights?

they need lights but they can be a set you can get on large magnets


What exactly does the term lutron refer to?

Lutron means light control such as: light switches and the different styles, light dimmers, etc. They appear to be ones that are mounted on the wall to turn lights on and off.


Passat 04 tdi indicator lights are not working?

If a Passat 04 TDI's indicator lights are not working, check the fuse. A blown fuse can cause the lights to stop working.


Where do the seasons appear?

they appear in the northern lights area in the north pole


Crown Victoria blower not working head lights?

crown Victoria blower not working and head lights.


Changed brake pads lights not working?

my lights are not working when i changed the pads on my peutgeo partner van


Brake lights and turn signals not working in 2005 Chrysler Town and Country?

tail -light and no brake light means the brake switch mounted along the streering column needs to be adjusted or replaced...the signals work off a flasher can mounted inder the dash...there is 2 cans ...trurn/emer flashers