If this is the European Ford Focus Front hub nut torque is 300-332Nm.
the torque value is 173foot-lbs for 2003 focus rear hub nut
Mk1 Focus Euro spec (not US), rear hub nut, the big one in the middle, 29mm socket, torque to 235Nm
The 2000 Ford Explorer front hub nut has a torque specification of 140 pounds of pressure. The hub should not be over tighten. Over tightening can ruin the seal.
133 lbs
The hub is pressed in. Remove the knuckle with the hub and bearing in it and take it to local machine shop.
296
chevy cobalt torque specfront hub
how to remove hub assbley from car 2000 ford focus
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
Hub and bearing assembly and tighten the bolts to 61-78 ft. lbs. (83-107 Nm)
front hub 120nm i think
Focus is a front wheel drive vehicle. The wheel bearings are of the sealed variety.It's pressed into the hub. Take it to a machine shop to R and R.