Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher
you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
If your 1999 Ford Expedition has turn signals that do not work but hazard lights that do work, it is likely that you have a fuse that is blown. You might also have a wiring issue including exposed wiring.
Is the hazard lights button not on top of the steering column ? The switch for the hazard lights on my 1995 Ford Explorer is part of the multi functin switch ( turn signals etc. )
Probably a faulty multifunction/stalk switch.
Defective Flasher Relay.
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
Turn signal flasher?
hazards and turn signals have separate flashers. replace flasher for turn signals
try replacing all sets of fuses for the hazard and the tail lights.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
get the whole care re wired also dont turn on your hazard lights!!!
When both of the turn signals (indicators) of a car blink simultaneously, it is usually because the hazard lights are turned on.
turn signals won't work. changed all the bulbs. Hazard lights work. 1999 Chrysler Sebring hardtop