Using active hubs you can connect 127 devices to each USB port.
at a tim one device
An Uplink Port is a port on a connectivity device, such as a hub or switch, used to connect it to another connectivity device.
u can connect a 4 port adapter to a single usb port but if u are using all for ports u may experience slow data transfer
A USB port is both and input and output port. Depends on what is connected to it as to which is functions as. Connect a camera and it is an input device. Connect a printer and it is an output device. Connect a printer/scanner and it is both.
No, The port on an ipad is a device port, not a host port. You would have to get a USB on the go adapter for iPad to connect external devices.
Use the wire cable to connect with it if you have a USB port in your computer.
It allowes someone to input a device into the computer. (Connect an ipod, flashdrive, etc.)
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
Possibly the machine on the other end is not programmed to respond to this port; or the port is blocked by an intermediate device, such as a router.
external wired peripheral device must have a corresponding that connect it back to the
On a typical setup, only one device can be connected to the ports. However, if you have a special USB port, or a device that will split a USB port, you can connect 2 or more devices.
Sometimes USB devices will display a warning that they have exceeded the power limits of the hub port. This means that the port cannot keep up with the power demands of the device. To fix the problem, either switch ports, or connect the device to an outlet cord.