answersLogoWhite

0


Best Answer

try replacing the actuator valve on the front axle

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Front end wont engage 89 GMC?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you lower the rear end to the front end of a 2003 gmc sierra?

shoot the tires out!


Can you put a 2000 gmc jimmy front end on a 94 s-10?

no


Why does the Front end squeak in 2002 gmc envoy?

Mine was the hood. I lubed the hinges and the front latch. Problem solved!


Why won't my 1992 Silverado four wheel drive engage?

the actuator on the front end is more than likely the problem. it is electric and it is usually under water or in mud when it is engaged. it is an easy fix. it is located on the front axle tube almost in the center of the front end. it is the only thing on the axle that has wires going to it. oh you will need to remove the skid plate first. then unhook the wires to it and unscrew it out. it has a big nut made on it like a 1 1/4. you made need to put out on it something serious to break it lose. dont be afraid of breaking it you wont. then put your new one in. you can jerry rig it if you wont to. when you take it out slide an old short socket or something like that in the hole and screw it back in. this will engage the front end for good. your 4 wheel drive will still disengage at the transfer case put not at front end like it normally would. doing this you can engage the 4 wheel drive going down the highway and no worries everything in the front end is engaged already. i know this because i had a 1994 that was nothing but a mud buggy. you could engage the 4 wheel drive running 80 down the highway.


Is the front-end of a 1995 GMC Suburban and a Chevy suburban interchangeable?

Yes they will, There the same thing.


Where do you find the nipples on the front end of your gmc sonoma?

well i would suggest checking at the tip of the breast first


What does it mean when you engage 4 wheel drive on a slick road stopped and when you start out again the front end clunks?

It may be a front U-Joint, or front driveshaft/cv joint.


Will a 1982 gmc 10 bolt rear end fit a 1987?

in a pick up it will if it is 4X4 you need to make sure the gear is the same as in the front end


Why won't my 4 wheel drive engage on my 91 GMC Sierra I shift into 4hi or 4low and nothing. It doesn't engage the front wheels and the indicator light on the shifter does not come on.?

Had that happen to my 90 GMC PU. 4WD didn't work and the light on the shifter on the floor didn't light up - just like yours. I don' know what the part is called technically, but the shop mechanic at the dealer called it a donkey dick. Apparently, they go out about every 10 years. It cost about $125 as I recall and it's a 5 minute job to take out the old one and put in the new. It's some kind of electric switch close to the front end that electronically engages and disengages the 4WD. My son-in-law got under the front end and it looked like it was located close to the front axel. He didn't have to jack it up or anything.


Where is the crankshaft position sensor on 1994 GMC Sonoma 4.3 vin w?

Pretty sure it's at the front end of the crank.


On your fathers 1997 Ram 1500 4WD there is what appears to be an air hose attached to the front axle that has come loose Is this the vacuum line for the front end 4wd?

I believe that is the vacuum to engage the front axle when in 4 wheel drive.


Will 2007 Lincoln front end Body parts fit on a 2003 Lincoln Navigator?

they wont fit. unless you modified them.