Want this question answered?
Well its a wheel bearing hub assembly that you need to buy. Autozone has a Timken/Wheel Bearning/Hub Assembly-front its $79.99 and they have the Duralast/Wheel Bearing/Hub Assembly-Front $51.99
The front wheel hub on a 1999 Chevy Lumina is connected to several suspension components. Loosen and remove all the components including the lower and upper ball joints. Pull off the hub assembly and install the replacement.
yes
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
The frontdoes not havea "wheel hub assembly". It is an individual sealed roller bearing that has to be pressed on and off the front spindle. It is a Toyota thing!
need diagram of 1992 4wheel drive front hub disasembly
Unfortunately, you can't replace the front hub bearings--you have to replace the entire front hub assembly. This is becoming the rule and not the exception in both foreign and domestic later model cars. Gone are the days of simply replacing $10 worth of bearings. You can get a Timken replacement hub from Autozone for about $107.00 (PN: 513090). The hub assemply is held on by four cap screws and is a relatively simple replacement. I would recommend using some Locktite on the cap screws and torque each to the specifications for your vehicle. ERB
With a Wheel Bearing Hub Assembly, you might get both the wheel bearing and the hub assembly. Sometimes, especially with FWD vehicles, the front hubs will not have the bearing with them but the rear hub assembly will. Most part manufacturers will follow what ever the auto company recommends.
Of course there are bearings, how else would the wheel turn. Fortunately you can buy the entire hub assembly which is only held on by 4 bolts, so no bearing removal or replacement into the core. This is about 45-$60.
http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html
YOU HAVE TO TAKE THE HUB ASSEMBLY OFF AND HAVE A SHOP PRESS THE BEARING,OR REPLACE THE HUB ASSEMBLY FROM A SALVAGE YARD.
part of the hub assembly