Want this question answered?
you can, but you need to be fairly good at soldering as they are soldered on the board. Find the correct size bulbs will be a challenge also. Buick had a better idea. No wonder thy went broke
Changing a headlight bulb in a 2007 Buick Lacrosse can be done easily. Just remove the cover piece and change the bulb.
194 bulbs you can get them from any advance auto
You have to remove the instrument cluster to get access to the bulbs.
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
Pull out your instrument cluster and check the back of the cluster for any blown bulbs.
You have to pull the instrument cluster out of the car. On the back of the cluster are numerous bulb sockets. Turn the sockets (sort of the same way you have to turn the sockets to remove say..taillight bulbs except the wiring to these bulbs goes through the same printed circuit that feeds the rest of the instrument cluster) The sockets and bulbs should come right out. Pull the bulbs out of the sockets and take them to an auto parts store. Get the auto parts store to verify which bulbs you need (don't want to go to all this trouble and fing out you put the wrong bulbs in). Reinstall the bulbs in the socket and reinstall the sockets on the back of the instrument cluster and then reinstall the cluster.
Changing the instrument panel lights require removal of the dashboard. With the dashboard removed pull the gauge cluster out and take off the bulbs. Install the new bulbs.
Remove the instrument cluster then replace the bulbs. = =
The instrument cluster needs to be removed to get at the bulbs.
Follow the Youtube video.
Remove the 2 screws at the top of the instrument cluster bezel (or dress front cover), carefully pry out with a small screwdriver and set aside. Remove the 4 screws that hold the instrument cluster to the inner dash and pull out. Turn instrument cluster over to access the bulbs for removal and replacement. Twist the bulb retainer to remove.