0
TO get to the wheel cylinder you have to romove the wheel. Then you need to pull of the brake drum. You can make it easier if you take a flat head screwdriver and pry the drum off a little bit to get it started. After pulling the drum off you will see the wheel cylinder at the top pressing against the brake shoes. Undo the 2 bolts on the back and the brake line. You might have to compress the pistons and pull the shoes apart a little bit to wiggle it free. You can also use a hammer to hit the back side of the clylinder to get it out.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you install a wheel cylinder on a 1998 dodge grand caravan?
Rear wheel? Remove wheel Remove brake drum Loosen and remove brake line to wheel cylinder Remove mounting bolts at rear of wheel cylinder Pry brake shoes back from wheel cylinder Pull wheel cylinder off backing plate Install in reverse procedure Bleed affected brake line
Is 2001 2.5L 4 cycl doakota front wheel drive or rear?
The 2001 Dodge Dakota with the 2.5 liter 4 cylinder is REAR WHEEL DRIVE
2000 dodge neon can't get air out of brake system?
You might have a leaky rear wheel cylinder. Check it out, if not check master cylinder
How do you change master cylinder 1998 dodge ram truck rear drum brakes?
Take it to the mechanic and pay him.
What does brake fluid leaking from the left rear wheel mean on a 1996 dodge ram?
I found out it`s the cylinder
How much does a 3500 Ram Dodge truck weight?
A 2006 Dodge quad cab dual rear wheel 3500 wighs 6740 lbs.
Dodge Dakota front drive shaft cv joint?
The Dodge Dakota pickup truck has CV joints on both front wheels. The pickup truck also has a driveshaft, as it is rear wheel drive.
Does a 1996 dodge Dakota truck require front wheel and rear wheel alignment?
yes all cars and trucks need to get aligned at some point
How do you connect spark plugs on a 1996 Dodge Dakota?
For all Dodge V8 truck engines, the firing order is 1-8-4-3-6-5-7-2. For all Dodge V6 truck engines, the firing order is 1-6-5-4-3-2. For Dodge inline 6 cylinder truck engines, the firing order is 1-5-3-6-2-4 For all Dodge 4 cylinder truck engines, the firing order is 1-3-4-2. All Dodge truck distributors are numbered in their firing order and rotate clockwise. Cylinder numbers for a 4 cylinder are 1-2-3-4 front to rear. Cylinder numbers for a V6 are 1-3-5 front to rear, passenger side, 2-4-6 front to rear driver's side. Cylinder numbers for a V8 are 1-3-5-7 front to rear passenger side, 2-4-6-8 front to rear driver's side.
How much does a 1997 Dodge 3500 truck weigh?
1997 Dodge Ram 3500, Reg cab, 8ft bed, 5.9L V8 gas engine,135" Wheel base, Rear wheel drive, Dual rear wheel, Manual transmission w/OD, GVWR is 10,500
Is the 2012 Dodge Challenger front wheel drive rear wheel drive or four wheel drive?
The 2012 Dodge Challenger has rear wheel drive.
Is the 2008 Dodge Challenger front wheel drive rear wheel drive or four wheel drive?
The 2008 Dodge Challenger has rear wheel drive.
