answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: HOW DO YOU CHANGE HEADLIGHT ASSEMBLY ON 2008 Chevy Silverado?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change headlight in a 2000 silverado?

Pop the hood there is a pin (metal rod L shaped around 1 in on the short side and 6 inches on the long side) that is above the headlight assembly remove the pin and the assembly will essentially fall out, change bulb, replace the assembly and put the pin back in. 2000 Chevy Silverado LT Ext Cab 4 dr 5.3L 4x4 Z71 Driver


How do you replace a headlight bulb on a 2005 Chevy Malibu?

You will need to take the complete headlight assembly loose or out to get to the bulb to change it.


How to Change the headlights in 2000 Chevy maliby?

on top of headlight assembly, there are 2 tabs to pull up, then pull assembly out.


Replace 2005 Chevy Tahoe passenger side headlight?

Open the hood and then examine the top of the headlight assembly and locate the two pins that can be pulled up and out of the assembly. Then rotate the headlight Assembly out of the front of the grille and change the headlight bulb...reverse the process


How do you take apart the headlight assembly on a Chevy silverado?

You didn't say what year so here goes. On older models you need to remove the plastc grill piece to access it. On newer models there is a L shaped pin on the top of the headlight that when pulled up releases the headlight assembly.


How do you remove the boot that covers the rear of the headlight assembly of a 2003 Chevy trailblazer?

It pulls off. Sometimes easier to remove the headlight assembly to change the bulb. We have instructions at our forum. www.trailvoy.com Trailblazer enthusiasts!


How do you change headlight on Chevy pickup 2008?

Open the hood. On top of the headlight assemblies, there's a curved metal rod. Pull that out, and you can pull the headlight assembly right out. From there, you turn the bulb ballasts counterclockwise and pull them out, and you can either replace the bulbs at that point, or the whole headlight assembly if necessary.


How do you change a 2005 Chevy silverado front wheel bearing?

It's a sealed unit with the hub. You have to replace the whole hub assembly.


Change low beam headlight on 2001 Chevy blazer?

Open the hood, stand in front of headlight, notice two black tabs sticking up behind the headlight assembly in back of the radiator support. Pull these two tabs straight up and off. This will unlock the headlight assembly. Now you can wiggle the assembly out the front and gain access to the bulb. Reverse for assembly.


How do you change a distributor on a 98 Chevy Silverado?

how to repace the distributor on an 98 chevy silverado


How do you change the knock sensor in a 2003 Chevy Silverado 5.3?

how do you change the knock sensor in a 2003 Chevy silverado 5.3


How do you change the air conditioner belt on a 2004 Chevy Silverado?

how do you change the air condition controller in a 2004 chevy silverado