Try tightning the bolt behind the bracket
FXDL
It is actually FXDL. Motor Vehicle Departments shorten it to FDL for some reason. A FXDL is a Dyna Low Rider. I bought a 1994 FXDL today.
.040, or forty thousandths
39 mm
how do you remove the back wheel on a 2005 Harley Davidson Dyna low rider FXDL
looking underneath the bike; it is the plug on the shifter side of the bike.
NOT ConanJay Leno
If it runs with the choke on, and then- just won't with the choke off,, gas flow is restricted..
the purpose of the choke relay is to supply power to the choke heater ONLY when the engine is running; otherwise if you left the key in the run position but the engine wasn't running the choke would open up even though the engine wasn't warmed up. then when you tried to start it, it wouldn't start because no choke. the control circuit for the relay usually comes off of the back of the alternator triad winding (alternator not turning=engine not running). without looking at a wiring diagram i can't tell you the details of the wiring but that's the idea of it- engine running turns relay on and sends power to choke heater and slowly opens up choke; key on but engine not running means relay is off and no power to choke heater. if the relay is not working, then no power will go to choke heater and the choke will stay on too long (or if ambient temps. are low it may stay on all the time). fast idle will stay on also as it is hooked up to choke linkage.
It's on the bottom side of the motor
These should all be capitalized but WikiAnswers doesn't allow all caps: flhtcui flhrci fltri flhrs flhr flht flstc flstf fxdwg fxdx fxdl fxd fxstb fxstd fxst fxsts vrsca vrscb xl883c xl883 xl1200c xl1200r
kehin carbrator and has enrichner