Yes. I've done several myself and know many people who also have done so. If someone told you nobody's ever done that they are lying.
An abs sensor, can get metal shavings stuck to it, can brake clean, but normally if you have a fault it needs to be replaced.
No, the abs is separate from the diagnostic plug fuse. If a sensor has failed, it will need replaced.
You may have mis-aligned the sensor when you replaced it.
On a VW Jetta 1999 the ABS light won't turn off. Does the ABS system needs servicing or is it a sensor that needs to be replaced?
I just replaced the ABS speed sensor located on the rear differential and fixed the problem. 10$ 10 minutes.
Before replacing the hub inspect the wiring harness. It is probably fried. I replaced both hubs to no avail then replaced the wiring harnesses on both sides and that fixed it.The ABS sensor is located inside the front wheel bering. To "fix"the sensor, requires replacement of the wheel bering hub.
To test an abs sensor for a Lexus ES you will need to use a multimeter. The multimeter will determine if the abs sensor works or not.
I just covered them with black tape until I replaced the ABS sensor, then they both went out and I removed the tape. ABS sensors are cheaper on Ebay than at a parts dealer I've learned.
your brake fluid is low ur pads need to be replaced or ur sensor is bad
more than likely a scan tool will have to be used, to clear the code that was set , when the ABS light came on.
Yes all 4 side has abs sensor but you got to go to a mechanic shop to diagnose and which abs sensor is not working
how do you check the abs sensor on a 1998 contour