wont, start,change punp,not getting gas
No, 97-03 F150's have a 5x135 lug pattern.
The first thing I would check is the factory immobilizer, try another key if you have one.
Yes it did.
i need full wiring diagram on a 1982 ford f150 xlt with the 351 clevland 5.8 ltr
If it is an aftermarket item it could be a by-pass switch for a remote start.
If your Ford Bantam is not starting, you might have a dead battery or a problem with the starter. You might also have an empty gas tank or clogged fuel filter.
What year? On older models, it could be the solenoid that has gone bad. On newer models, it could be the switch, or the starter itself. If you have an alarm system, it could be interfereing with the start circuits.
The starter have a bad rep But you can replace the relay and clean the connections but 9 out of 10 times it's the starter itself.
You wouldn't happen to be using too heavy of an engine oil ? What grade of engine oil are you using ?
There is no OBDII connector on 1993 F150. Didn't start until 1996 (97 model).
Possibilities include: no gas in tank, clogged or inoperative fuel pump, clogged fuel filter, bad spark plug or wires, engine timing needs adjusting.
There are a couple of a reasons why a 1994 Ford F150 truck will not start. The truck may have a dead battery or the spark plugs need to be replaced.