Want this question answered?
The "crank" sensor is the pickup plate under the distributor cap.The "crank" sensor is the pickup plate under the distributor cap.
The distributor pick up plate is under the rotor inside the distributor.
If it has a distributor it has to come out and be completely disassembled //its under the rotor!!!
Inside the distributor, under the rotor.
The cam position sensor is inside the distributor, under the cap and rotor. There isn't a crank sensor.
The pickup coil in the distributor? !976 should be an HEI distributor. Take the cap off, unplug the wires going to the distributor, remove the rotor and the pickup coil is under the rotor and held in place with two screws.
It is directly under the rotor inside the distributor cap.It is directly under the rotor inside the distributor cap.
No, there is not a fuel pump reset button on the 93 Acclaim. You need to check your fuel pump fuse under the dash of your vehicle.
It is bolted inside the distributor under the rotor on bass plate
It is mounted on the distributor plate under the cap and rotor. On the right hand side of the distributor when looking at it. It will have electrical connectors plugged into it on both ends.
Check the module under the distributor cap.
the cam sensor is under the distributor cap.this engine uses the distributor pickup as a cam reference since the dstributor is cam driven