expose back of bulb, turn to the left, replace bulb, return to socket, turn to the right
Replace brake light switch.
Look under the dash on the 1996 suburban, and locate the brake light switch on the brake pedal arm. Remove the switch nut, and slide the switch out. Unplug the wires from the switch and install the new switch.
Brake light on and why
looking for help on the brake light ground wire location for 1999 gmc suburban 4x4
Check the brake light switch. It is defective or out of adjustment.
no...replace as a unit
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.
replace rear brake hydrolics
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
you got to replace to light bulbs
Have you checked the brake fluid level in your brake master cylinder in your engine compartment ? a low level will turn on your brake light in the dash