The G8t engine? You are not going to like/believe this.... you need to remove the engine (bu lifting the car off it using a 2 post ramp) to remove the manifold. French design! It is just possible to remove pre-heaters & injectors with the manifold, and the engine, in situ. But any more than that - no.
hi there you have to remove the top engine mount and inlet manifold about 15 bolts its a bit potchy to get out and then you can get at the heater plugs
2 ways easiest is too remove inlet manifold other is too remove engine 3 ltrs only
When you stand at the frount of othe car, bonet up. The temp switch is under the Inlet manifold (left side) at the front of the engine.
exhaust or inlet manifold?inlet distributes fuel to all cylandersehaust collects gases from all cylanders and directs to one out let
replace the water heater inlet pipe on the intake manifold on a 3800
underneath the inlet manifold.
On the 12 valve engine it is positioned underneath the inlet manifold at the gearbox end to replace I found it easier to remove the inlet manifold after wasting time trying to do it with the manifold in place.
Intake or inlet manifold has nothing to do with the heating of the car. Newaz.
Inlet or Exhaust?
cast iron
the alternator is located under the inlet manifold
if you mean firing order , it is written on the inlet manifold