You can unscrew your stuck oil filter with an oil filter wrench. If the oil filter wrench does not work, punch a metal rod through the oil filter. Turn the oil filter off with the metal rod.
left valve cover
remove the cover where the gas cap and filler hose is it's mounted on the top of the tank.
there is a round cap next to oil filler cap unscrew and filter is inside special tool recomended but a big plyers will work
The oil dipstick is built into the oil filler cap. Unscrew the cap, pull the dipstick out, wipe it dry and reinsert it. Remove it again to read the oil level.
Unscrew the plastic drain petcock lower drivers' engine side of the radiator and take off the filler cap
An oil filler cap is a metal that covers the hole where the oil is poured.
Oil filler cap cover the hole in the engine where engine oil is added
Filler cap for 1400 jcb backhoe
If it's similar to earlier models, the oil dipstick is built into the oil filler cap. Unscrew the cap, pull the dipstick out, wipe it dry and reinsert it. Remove it again to read the oil level.
Open filler cap, add oil, replace filler cap...
there is no filler cap. pull the tranny dipstick and use a funnel.
The oil FILLER cap is turned about a quarter ( 1/4 ) turn to the left and lifted out.The oil filter is removed by using a special tool to unscrew it from the engine block.