answersLogoWhite

0


Best Answer

Assuming that you are talking about one of the bumper break lights, you first remove the inside rear panel of the trunk. There are usually several large plastic screws that use a US quarter as a screw driver, and possible two small screws that hold a contact plate near the power pull down. Once you have removed the inside panel, you will see large black wingnuts. Thread them off on the side that you need to replace the brake light, and then push them firmly out. The tail light assembly should slide away from the body and you will see the tail light connectors from the back. The connector is held in place by a retaining piece much like child proof pill bottles. Squeeze the sides of the connector while turning and the bulb and connector will come out in your hand.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How can i remove the plastic cover on a 92 Chevy Camaro to replace the blown out brake light?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the fuel pump on a 1987 Chevy Camaro?

You must remove the fuel tank.


How do you change a tail light bulb on a 1991 Chevy Camaro z28?

Pop the trunk, pull back the trunk liner, remove the 5 plastic screws/wingnuts, and separate light assembly from the car, remove the bulbs and replace.


How do you change the tail lights in a 1983 Chevy Camaro?

remove interior panel and unscrew large black plastic nuts, remove light assembly


How do you remove the rear shocks on a 2002 Chevy Camaro convertible?

How do I remove the rear shocks on a 2002 chevy camaro convertible?


How do you replace a water pump on a 1996 Chevy Camaro z28?

How can do I replace a water pump on a 96 camaro z28


How do you change the outside rear taillight bulb on a 97 Chevy camaro 30th anv?

open trunk and remove interior trim. remove five plastic nuts then pull out light assembly. depress the clip and twist the bulb holder counterclockwise and pull out. remove bulb and replace,and reinstall.


How do you replace the fuel filter located on a 1995 Chevy Camaro?

remove neg battery terminal, and the gas cap then replace the filter. Its under the vehicle towasds the gas tank


How do you remove paint from the bottom of a 1970 Chevy Camaro?

Paint stripper works well, but cover plastic and rubber parts because paint stripper will destroy them.


How do you remove the catalytic converter from a 89 Chevy Camaro?

With a Sawzall.


How do you replace the clutch on a 1999 Chevy Camaro SS?

Take it to a mechanic.


How do I replace 1994 Chevy suburban universal joints on rear drive shaft with plastic keepers on the inside of yoke?

use a torch to melt out the plastic then remove the clips(on the inside) and remove as normal


How do you remove a starter for Chevy Camaro v8 93?

Begin by removing the positive cable from your 1993 Chevy Camaro battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. The starter will come off.