First, you'll need replacement parts. These can typically be obtained through the manufacturer or at a retail location such as Home Depot. Finally, the directions for performing this task are listed in full at the web domain "eHow."
Yes, you can indeed just replace the shower hose. There is no need to replace the entire thing if it does not need to be.
Replace the spout with one that has a place to attach the hose for the hand held.
form_title= Aqualisa Shower Hose form_header= Love your shower hose when you have an Aqualisa Shower hose. How long is your desired shower hose?*= _ [50] Do you want to remove an old shower hose?*= () Yes () No Have you recently redone your bathroom?*= () Yes () No
You can't . -Buy a new one, they are cheap.
No fixing that one, replace it with a new one.
the used of water hose is to shower the plant or anything
There are quite a number of various specialties with Moen shower heads depending on which Moen shower heads one wishes to purchase. One specialty is being detachable and movable with a connecting hose.
This one's a no-brainer. Go to Auto Zone, et al, and purchase the hose, look at the other one, remove and replace.
find the hose you want to replace. on that hose will be a hose clamp on each end. take them loose and remove the hose. when you go to put the new one on put some dish soap in both ends this will help it slide back on. make sure you have the hose clamps on the hose.
Any diverter can be used, you just need a connecting hose and hand held shower head. Remove current shower head and add connecting hose and hand held shower head. Keep in mind, that some hand helds come with optional stationary shower head as well as the remote one.
First, remove the shower head and test the valve. If you have plenty of water at the shower with the head removed, then the problem is a clogged shower head. Clean it or replace it. What the hell...just replace it. You deserve it. Go buy one of those cool shower massage heads to replace it. If you discover you have poor flow at the head with the shower head removed, then you have a blockage in your valve. So you buy a 1/2 (female pipe thread) x Hose Thread adapter. Put that on the arm for your shower head. Turn off the water to the house. Borrow a neighbors hose and run it through a window and connect it to the shower head (hose thread adapter). Now take the hose off your washer box and drop the hose into the drain hole. Now turn on the water. The water from your neighbor will allow you to backflush that valve. The debris will backflush and wash out through your laundry hose on down the drain. If that doesn't work, then yes, you probably need to replace the entire valve. (I'm assuming your already taken the cartridge apart and cleaned it) == = Is your tub spout still running alot of water through it when you use the shower? If so replace spout, if three valve, replace center diverter. If that is all ok, Then yes take off shower head and see if you have the pressure, if so install new shower head and or clean. If not head, then screw on .5 x hose adpt. to the shower arm, you will have to have one washer hose to connect to your outside faucet then to your garden hose which will connect to the shower arm. Leave faucet hot and cold water off, turn on outside faucet all the way, this will let the water go through the valve and out the spout. If this does not work replace faucet.
The thermostat is under the top radiator hose. Remove the radiator hose at the top of the engine, below the hose flange sits the thermostat. just pull it out and replace it with a new one, then replace the hose over it. hope this waas the help you wewe looking for.