0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you get fingers cut off if you touch mold?
No mould will not hurt your fingers.
How do you remove a PVC flange glued to a PVC drain pipe?
pvc flange if glued properly can not be detached you just need to cut it and fix up a new one if the old flange is useless. www.pvcpipe.in
How do you remove a toilet flange?
if it is a PVC flange glued on to the outside of 3" PVC pipe, there is a tool available that will cut it off and you can glue a new flange on the undamaged pipe. It's called a Flange-off. Available at Locke plumbing supply.
How do you remove the broken closet flange from inside an ABS black pipe or is there an adapter that would fix the outside of the pipe?
What is actually broken the flnge ring rusted out and broke or the abs pipe? Abs pipe/flange broken: Use a ram bit to cut it out and install a new one. http://www.plumbingsupply.com/pvcsaver.html use a compression or expansion flange http://www.plumbingsupply.com/toiletflanges.html or just cut the pipe and put in a new one Flange ring rusted/broken: install a toilet flange repair ring or a spanner flange.
What is a fire hydrant breakaway flange?
It is a flange that uses bolts designed to allow the hydrant to break away from the flange on impact (think crazy taxi). It reduces damage to the fire main piping.
I need to replace my toilet flange. how do you get a glued on flange off without damaging the actual pipe?
you can't cut the pipe back use a cuppler and come off of that There is a tool that will cut the old flange off that will not damage the pipe. It is brand new to the market and is available through Locke plumbing supply, or call the manufacturer, Woods plumbing in OKC....405-722-2925
What types of mould are there?
injection mould blow mould extrusion mould Comprssing mould
How do you repair toilet bowl mounting flange?
depending on your type of flange and pipe and the damage of the flange, if you have a PVC flange with just the bolt slots busted then you can screw in new bolts to the floor below the flange and still use the flange but if its broken where the wax seal sits then if your flange is lower then the floor you can use a insert flange that fits inside your old toilet flange with thin walls to keep the pipe size maximum. To replace the entire flange can be a job especially if its in concrete or in a floor joist because most of the time you have no room and if its cast iron pipe it can be even more of headache but in order to replace the flange you need to cut it out to where you can reconnect the pipe and flange by using a fernco or a no hub band. Sometimes it is impossible to replace because the flange can be on all close fittings and you pretty much have to replace most of the plumbing drain pipe to replace it properly which is why you want to try repairing your toilet flange rather then replacing it .
What will happen if you eat molded bread?
do not eat it, you will get a stomach ache or very ill, all bread mould is poisonous and should not be eaten, do not simply cut off where the mould is, because the same microorganisms might still be living on the bread, but is not clear/big enough for the human eye to see. do NOT eat it.
Do you need to chip away some cement to place a toilet flange correctly in a basement on a cement floor?
Most likely not, depending on the type of pipe you can find an inside flange to fit.
How do you cast pewter?
you cut out the mould, including a sprue (overflow) out of MDF or some such and clip it to two other pieces of MDF using special springs. you melt some pewter down in a machine and place the mould inside it (wearing gloves and goggles) you align it properly and pull the lever and the side to release the molten pewter into your mould. you then take out the mould and leave to cool before taking the newly-formed pewter object out of the mould and sawing off the sprue.
How do you make an amulet on RuneScape?
First you need an amulet mould, a ball of wool, which you can get by shearing sheep and spinning the wool on a spinning wheel, and a cut gem of any sort, and a gold ore. Add the gold ore to the amulet mould, then add the cut gem. Finally, put in the wool and wear your amulet. Voila!
