0
using the center circle finder tool that they sell at the home depot. Their really cheap and you could probably get one for around 2$
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Where is a black hole In space?
A close one is right at the center of the milkyway. But you can find them anywere a large star exploded or the center of galexys.
The center of a black hole is called a?
The center of a black hole, a locus of infinite density where matter is compressed into zero volume, is called a 'singularity.'
What is the name of spec for the holes in a monitor's aperture grill?
It is called dot pitch the measurement from the center of one hole to the center of the hole next to it.
Is the black hole a part of your solar system?
There is no black hole in our solar system.It is believed, however, that there is a black hole at the center of the Milky Way Galaxy, and that there are black holes at the center of every galaxy.
What do you call the center of a black hole?
The center of a black hole is called a singularity, where a huge amount of matter is crushed into a single point. That's scary, isn't it?
How do you fill my 97 jeep rear axle with oil?
Remove the plug in the center of the cover plate. Squirt oil in until level with bottom of hole.Remove the plug in the center of the cover plate. Squirt oil in until level with bottom of hole.
If you have an iron plate with a hole in the middle and you heat the iron plate what will be the size of the hole after its heated?
the whole will shrink
How do you find the center of gravity of an object?
POKE a hole in the middle of Isaa Newtons head.
How heavy gear case oil goes secondary gearbox of a Suzuki 1200 madura?
First the fill hole has a hex head socket screw in the top of the trans. second you have to pull the cover plate over the gear box (4-8mm bolts) once that is removed there is a metal plate on the end of the trans. with 5 8mm bolts holding it on. In the center there is a 8mm screw in the center of that plate remove that. Fill the trans. from the top hole until oil comes out of the hole you removed the 8mm screw from. replace the 8mm screw then the hex head socket screw in the top, as well as the cover plate. CAUTION: PREFORM THIS WITH THE BIKE ON THE CENTER STAND.
How do a clutch look?
Clutch disc? If this is what you are asking, it looks like a plate with an abrasive surface on both sides. In the center is a "splined" hole. Hope this helps
Where is a black hole In space?
A close one is right at the center of the milkyway. But you can find them anywere a large star exploded or the center of galexys.
How do you get in the trunk of a 1994 jaguar if the manual latch is broken and battery is dead?
Remove the rear lic. plate, drill a hole about 3/4" dia in the center of where the plate was mounted, look in the hole using a flashlight and u should see the rod for the lock, grab that with a pair of needle nose pliers and pull up or down and the trunk should release, fit a rubber blanking plug in the hole and refit the lic. plate.
What license plate has a tree in the center?
The State of Oregon has a tree in the center of it's license plate. See the link below for a picture of the plate.
How do you change spark plugs in a 1999 continental?
You will find a cover plate that is about 12 inches long that will say something like 32 valve in crome. Take the two bolts out that hold that plate in place. You will see four coils. Pull out one of the coils and look down that long hole. You will find your plug at the bottom of the hole.
Where could someone find a black hole?
Black holes are in outer space, far outside our solar system. Most galaxies have a large black hole at the center.
Where is the center of gravity in a doughut?
Just about where the center of the hole is.
Could the center of mass exist in a hole within the body?
Yes. Consider the toroid. (A doughnut) The center of mass is in the center of the hole in the middle.
