Remove the header and all oil existing in the quad. There is a plg at the bottom of your quad that will let out all oil. Pass new oil through the quad and out the plug repeatedly and change your sparkplug. Start up quad with header off and let it spit all the water out. After a while you may re-install the header and put the plug back in with the new oil. Dont forget to change oil filter every 10-15 hours of riding time.
from amazon.com or type quad enines
Open the hood and look on top of the engine. If it says 16V QUAD 4, then you have a quad 4.
If a quad driver has gone bad it is necessary to replace the ECM. After replacing the ECM, drive the car on a bumpy road and note whether the check engine light comes on. If it does, fix the problem or you end up with a repeat QDM failure. == == == == There is no such thing as a quad driver module. There are quad DRIVERS in the ecm.
Sing the song, you know Fix up locked brakes on Suzuki king quad 4 wheeler!
What is the best grade oil for Quad bikes
the first quad was invented by a greek union who fell off and made it with a quadrall force
2.3l quad engine digram
not true i have a 97 with a 2.4 ltr quad cam engine and it has 190,000 miles on it.
the quad driver module is a component of the ECM. you must replace ECM.
because the water cools down your thing or else it will overheat. The reason why we use water is because it is a good heat sink (absorbs heat) and it isn't combustible.
depending on the mini quad it should go to 30mph-35
sorry to say but the Quad 4 engine does not have an extrernal EGR valve. The egr sys is built into the head.