It is highly likely that the fuel gauge is not working because the "sending unit" is not sending the fuel gauge information about fuel in the fuel tank. The "sending unit" is to be changed out at the the top of the gas tank (under the back seat). Accessing the unit should be done with the battery disconnected, unless blowing up your garage, home, your neighbors' houses, and, of course, yourself, is part of your plan. With the battery completely disconnected (I prefer to remove it for safety), you can unplug the electrical connector, unscrew the retaining screws, and pull out the fuel sending unit. The new one is inserted, screwed on, the electrical connector attached, the seat replaced, battery hooked up and ... WHOILA! The gas gauge is working, or, you are seeing satellite images of the space station. No. Seriously, the sending unit is the usual culprit in causing the gas gauge to not "read" properly, or even "read" at all. With some gas gauge failures, the sending unit tells the gas gauge that there is less fuel than there really is, and sometimes, the reverse, more fuel.
where is the fuel pump cutoff relay located in a honda 88 prelude?
The oxygen sensor on a 1988 Honda Prelude fuel injected engine is on the exhaust manifold. It screws directly onto the front of the exhaust manifold.
How do you replace the fuel pump Honda prelude 1992
How do you change a fuel filter in a 1997 Honda Prelude
12 gallons. 88, 89, 90, and 91 all have a 12 gallon fuel tank.
Yes, the 1997 Honda Prelude does have fuel injection.
mounted to the firewall just off center on the passenger side at manifold height. follow the fuel lines!
How do i take the fuel filter off my honda prelude si 1989
the fuel rail
The fuel pump is located in the fuel tank on a 1984 Honda Prelude. The gas tank will need to be taken down to access the fuel pump.
The fuel pump on a 1989 Honda Prelude is located in the fuel tank. Being close to the tank allows it to pump gas more readily to the engine.
The answer is no. The fuel-injected engine from your 1987 Accord is a direct-fit into a 1985-1987 Prelude Si, but will not fit into a 1988 or newer Prelude due to a completely different engine and transmission being used. The wiring harnesses and ECU will also be very different.