first remove the triangler shaped trim piece of trim located on the forward top of door panel..to do this, gently pry the top of the trim until top fastner is free..then pull trim piece up,until the two downward facing pins are free...you will see one screw ,remove it.....now gently pry the bottom of courtsy marker light lens off..located at the bottom rear of door panel...you will see one screw,,remove it...now gently pry power window and lock switch assembly upwards,,disconnect wires...you will see a screw in the upper section of the hole this switch assembly covered ..remove it....now the panel will come free by lifting up on the botttom ...be sure now to try pulling panel away from door until you have pulled the panel upwards enough to disengage retainer clips....once panel is free you will need to hold it up until you have disconnected the wires for both the power mirror switch,and lastly the courtsy light wire(remore that by turning the connector clockwise..good luck...
iin the manual that came with your expedition
Try eBay.
Type your answer here... how do you replace the shift cable on a 2000 expedition 5.4 liter
I install Motocraft on my 1998 Ford expedition XLT (4.6L)
It depends on the regular maintained and driving habits... I had a 1998 Ford Expedition XLT 4.6L. With over 125,000 miles on it and running strong... My brother has a 2000 Ford Expedition Eddie Bauer 5.4L that has over 225,000 + plus miles on his...
Look in your owners manual. On my 1998 Ford Expediton XLT 4,6L it has a 30 gallon tank
All Ford Expedition 1997 - 2000 are all the same. The only difference are the models Xlt and EB.
Could be many things. Have your universal joints checked.
I have the same question. Only I have a 2004 Explorer Sports Trac XLT.
XLT means Extra Large Truck
Check your owners manual. If you don't have one copy & paste this link. http://www.genuineservice.com/genuineservice/en/gloveboxresults
Yes, you can. I don't see why not. I always used 10W40 Castrol Oil.