answersLogoWhite

0


Best Answer

They will use the same amount of power. A 100 watt bulb will use 100 watts. If a bulb is rated at 100 watts and is specified as a 120 volt bulb, if you apply the 120 volts, it will draw 0.83 amps. Volts times amps equals watts. If you have a bulb rated at 100 watts and is specified as 12 volts, if you apply the 12 volts, it will draw 8.3 amps.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

its the same amount of electricity a watt is just a unit of work. V(Volts) x A(amps) = W(watts). you might want to take in the consideration of direct current and alternating current also if your planning on doing anything electrical.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

The formula you are looking for is I = W/E where I is the current in amps, W (or P) is the power in watts and E is the potential difference in volts.

A worked-out solution

I = P/E = 50/240 = 0.208 A

This answer is:
User Avatar

User Avatar

Wiki User

10y ago

With different ampere - electrical current

Watts are volts x amps, so amps are watts / volts

50/12 = 4.2 amps

50/240 = 0.2 amps

Same power(Watts), different voltages and different currents(amps)

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much electricticity is used with a 50 watt low volt light?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

With which Pikachu should you place the light ball to get volt tackle?

Any Pikachu I Used A Male One To Get Pichu With Volt Tackle, But You Can Get Volt Tackle With A Female.


Can a 220V light fixture be used in the US?

Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.


Do you need a voltage regulator if you hook up a 12 volt light to a 24 volt system?

Hook a 12 volt light to a 24 volt system and the light will burn out in seconds. You need a step-down voltage converter to do this.


How much time can a LED Light glow on a 6 volt battery?

depends on the size of 6 volt battery, if it's 4AAA might get 24 hours straight however if the 6 volt battery has a MAH (Milli amp hours) of say 75 then this case you might get 275 hours. much like the emergency back up light system in a warehouse, those are likely 6 volt


How do you know whether to get 120 volt or 130 volt light bulb?

If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.


Can you use a 130 volt light bulb on a 120 volt supply?

Yes, in fact that is what a rough service bulb is rated at. The bulb used on a 120 volt system will have a reduced wattage output as to what it would be on 130 volts.


Can you use 220 volt light bulb on 120 volt system - I know the reverse would probably blow the bulb so wouldn't European 220 Volt do ok in 120 volt socket or would it be dimmer than it normally would?

Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.


Does a 9 volt battery light a light bulb?

Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.


How much power is used by a 120-V car battery that draws 0.5 A of current?

Cars do not have 120 volt batteries. They are 12 volt DC.


Can a 24 volt Black and Decker battery be used on a 18 volt Black and Decker portable vacumn?

no it will burn the vacuum out too much voltage


How much voltage should be used to charge a 7.4 volt battery?

7.4 volts.


How much is 900 watts?

About as much as 15 typical (60watt each) light bulbs together. Or expressed in horsepower: about 1.2Hp Mains volts and ampere: 230 volt at 3.91 ampere = 900watt 110 volt at 8.18 ampere = 900watt