This is likely to be an unconventional solution to this problem, but you could use a small 2 channel mixer to get the signal levels right, assuming the stereo system outputs normal 1/8 signal or RCA.
It depends on the speakers. Bose computer speakers are not designed to connect directly to speaker inputs on your receiver, as they have their own amplifier. All Bose home stereo speakers can be connected.
To hook up stereo speakers in a truck, attach the stereo wiring to the stereo and run it to the speakers. Clip the stereo speakers into the wires and place them in the panel spaces in the truck.
Dont understand your question because stereo speakers are normal speakers
In general a stereo receiver,a dvd player(or changer),speakers and perhaps a tv.
Stereo Typical was created in 2010.
yes. There are two LowZ inputs, and a third input with a mini stereo jack
Yes, the speakers (150W) can handle more power than the stereo (140W) can produce. If it were the other way around (stereo more powerful than speakers), that's when you burn out your speakers.
The speakers in a stereo contain powerful magnets.
Location of the Stereo, placement of the speakers, location of furniture in relation to the stereo speakers, and sound absorption materials in the room all affect the quality of sound from a stereo.
The speakers are powered by the stereo, which in turn the stereo has a fuse. If the stereo works (turns on), but not the speakers, then it may be a wiring issue.
2.0 and 2.1 or even 5.1 regarding speakers means that there are 5 speakers to one output device such as the stereo. 2 speakers coming out of 1 stereo or 5 speakers coming out of one stereo. If you were to talk about 9.2 this would mean that there are 9 speakers but attached to 2 output devices such as a television as well as a stereo. Hope this has cleared up your problem.
The possessive form is: "The stereo's speakers are too small for this room."