Have the same problem...you need to see if it is a lose solder so you can remove the dash screws and pull out the head or you can see if you have a sensor. Look behind the oil filter and there should be a box with a wire the wire will run back to the speedometer head. Sometimes a quick fix can be to GENTLY push the wires toward the sensor. If none of this works take it in to the Nissan dealer and get it fixed it costs around 150 dollars. Check the fuses in the box they will be labeled cluster interior or dash.b Also check the fuseable links.
The instrument cluster is what houses the speedometer, and the gauges.
Check the sensor that is attached to the transmission. The other possibility is that the motor inside of the speedometer is broken. That happened to me on my 93 Wrangler. Went to the junkyard and got another instrument cluster.
The cable is manual drive on a 1991.It plugs directly in the back of the speedometer.
The Classic was the FLD132, and no. For one, the speedometer is set according to the gear ratio, tire size, and rear end gear ratio of the truck, and if those vary, the speed won't be accurate.
It is an electric speedo so it can be the speed sensor or in the speedo itself.
I think you need a speed sensor
I have a 1990 prelude that is in the dealership as I write this to have the speed sensor replaced. I have just been told that it is on the transmition. It is a sensor.
It does not have a cable... It is electronic controlled. It has a sensor that is bolted in the drivers side of the transmission TAIL SHAFT that controlls the speedometer among other things.
you have to take out the intrument cluster and replaced the light bulbs that are inside the instrument cluster!...its really simple
speed sensor is out or is going out. your speedometer is out too right?
I've bee told that the 1991 model doesn't have a cable it works off the speed sensor.
There is'nt one on the guage cluster but there is on the motor up by the thermostat housing