all you can do is drill it out and use a grinder as well takes around a hour to do big job
turn ignition key in lock on front grille
Hi,I assume that the bonnet is the same as the Connect and Focus?If it is, there is a lock on the bonnet/hood. Either behind the badge or the flip up panel
There is a keyhole hidden behind the Ford logo in the grille Take the transit door key come to the front of the van and look at grill under the bonnet their you will find a place where this key can be inserted and turn this realises the lock and the bonnet will pop open.
Remove the grill, then undo the bolts under the lock to release the barrell. Using a stubby Phillips screw driver you then undo the lock as if you were using the key to open bonnet. Then just undo the 4 10mm bolts that hold the assembly to slam panel, then refit in reverse.
Under steering wheel right hnd side
key middle grill then left and right
get a pair of long nose pliers, to the left of the bonnet lock (as you look at it) is the bonney cable, insert the pliers through the grill to get hold of the cable and push it to your right, towards the lock and the bonnet should pop. the just release the catch and it should open.
On the bonnet, slide the Ford oval and insert the ignition key into the lock located there
The bonnet is opened by the key,there is a rubber cover in the grille,turn key 1 way to release then the other way to open.
jack the car up and remove the fan unit then you can get your hand up to where the lock is located and you should be able to push the little catch on the left hand side of the lock this will then open your bonnet i had to do this the other day
You need a locksmith.
the Ford badge on the front of the bonnet lifts up to reveal the bonnet release lock. Use the ignition key and turn to position 1, lift the bonnet, then turn to position 2 to fully release