0
How can you remove a bent fuel pump push rod on Chevy 454 big block engine?
Wiki User
∙ 11y ago
You are not going to like the answer. But the only sure fire way to to tear down the engine at the very least pull apart the top end that is, the cam and lifetrs and with the oil pan droped you can push it back thru the block and it should fall out. After that the only other way to fix it, is to get a pump block off plate put it on and go with a electric pump.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you fix a stuck exhaust valve on a small block Chevy?
Gonna have to pull the head and find out what's wrong. Could be a bent valve.
Does a 3.1 1998 Chevy Malibu have an interference engine or non interference engine?
That engine is pushrod, it is the GM 3100 if I'm not mistaken. What are symptoms because bent valves are unlikely.
What are bent engine pistons?
A bent engine piston is a reference to the piston rod. The piston cannot be bent, but the piston rod can be bent.
Will a 2.4 Chevy engine be damaged if it jumped time?
yes definitely, bent 4 exhaust valves on my 98, and she was locked up
Is a 1997 Chevy cavalier 2.2L a non interference engine?
NO it is an interference motor 180,000 broke timing chain, bent #3 exhaust valve, luckily it must have stopped quickly as no more were bent.
Does a 2.2 liter 2000 Chevy cavalier have a interference engine that year?
Yes it does if the belt breaks you will most likely need a new engine, because the valves will be bent up.
What should you use to remove a bent nail?
A bent hammer
What are the dangers of overheating?
Cracked or warped heads, motor block, Bent valves, blown head and/or header gaskets worst case locking up the engine.
Is a 2.0 2003 suzuki engine a non interference motor it is in a Chevy tracker it has two timing chains the upper chain broke wondering if it bent or broke any valves?
it did in mine it bent 2 valves and i end it up replacing the head on it
How does an engine exhaust valve get bent?
the valve bent because the piston hit it, due to a weak valve spring or over revving the engine
What would be wrong with a Chevy s10 after changing timing chain the timing is right on but runs rough no compression in cylinder 4?
The year and engine size would help but you may have a bent valve or bent pushrod for # 4 cylinder if that is the only cylinder that has 0 for compression.
How do you tell if your wheel is bent?
Any decent alignment shop or place that sells and installs tires can remove the wheel, remove the tire, and check the wheel to see if it is bent. If it is bent very badly, just jacking up that wheel and spinning it by hand, you can see that it is bent.
