call a glass company, the seal on the window has broken, it will need to be vacuum sealed
How much will this cost
NO, If you try you trap moisture between the two glass. when the air heats up the moisture in the trapped air willcondense and form droplets between glass
Single Strength Glass is 3/32" thickness and Double Strength Glass is 1/8" thickness.
You cannot remove the moisture for the long term as the sealed beam seal has failed and moisture will continue to appear later. Usually a heat gun could be used to heat up the glass, careful not to melt any nearby plastic parts. Best bet is to replace the headlight.
Double glazing is the glazing process in which a window is formed by two panes of glass with a space between the panes. The space between the glass is usually several millimeters thick
because vacuum will make the glass collapse
When the air is humid and the glass is cold.
Glass is usually cooler than your breath. Breath contains moisture that condenses on the glass.
Because of the 2 layers of glass and air in between.
The moisture in the warm air collects on the cold glass. When enough moisture collects, it forms beads of water that run down the side of the glass.
The headlight assembly or actually the side light assembly on early SLKs were notorious for collecting moisture. The lens and the glass cover is a sealed unit (not too tightly sealed apparently) and cannot be opened. These were replaced under warranty until you got one that didn't leak and collect moisture. There is no easy way to remove this moisture from the outside.
The cold glass cools the air close to the outside of the glass and causes the moisture in the air to condense on the outside of the glass when the molecules in the air come close enough together to touch one another..
Because it contains a layer of air between the glass.