You may be able to use the tire iron in place of the rod. This is actually how some jacks are designed.
If you don't have a jack or wheel wrench there is no way to remove the tire. Unless you can turn the holder with a pliers, wrench or socket.
To remove the spare tire on a Mercury Mariner insert the jack handle into the hole provided on the rear bumper of the vehicle. Turn the jack handle clockwise to lower the spare from underneath the vehicle.
Removing a spare tire is easy to do from a Chevy Suburban. The tire is removed with the tool that is located on with your jack.
To remove the spare tire from a Toyota Estima, insert the jack handle into the hole provided in the rear bumper and turn clockwise. Turn counterclockwise to return the spare tire holder to normal.
To change a tire you will need a jack to lift the car, a spare tire, and a tool to remove the bolts of the tire. Use the jack first to lift the car, then remove the tire, replace it with the new one, and tighten the bolts.
To remove spare a tire from a GMC Envoy pull at the base of the cable this should free the bracket under the tire. Then take your jack lift up on the tire and slide it off. If you can not remove the bracket you can go to an auto shop and have it removed.
remove back covered area and use jack to reel tire down.
In the trunk, remove the carpeted floor cover over the spare tire, on the right side.
You will need to jack up the Chrysler Town and Country Van to remove the spare tire. It can be found underneath the van between the driver and passenger seats.
Where is the spare tire
Deftly hidden under the spare tire.
how do I remove the spare tire from a2007 toyota sienna