Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
i want to get a front windscreen for a seat cordoba spain
Slide seat back as far as it will go.Look under the middle of the front of the seat and you will find a acorn nut and bolt ,remove same.Lift/raise the seat slide handle up and push the seat back off the center slider. Note there is a spring loaded pin up front that will release the seat fully and then lift the sucker out
how do I remove the front seat from a 1991 fatboy
Remove front passenger seat on Lexus es300?
There is a little lever on the bottom of the seat. Pull that out and close the seat so that the backrest is touching the bottom of the seat. Then pull out the handle on the side of the back of the seat. The seat will then unlock from the hinges.
Remove the 10mm bolt from behing the rear seat. Then pull the rear seat it hooks to the front seat in the front. Remove the bracket there and pull the front.
Use your key on the left side by the seat. turn it counterclockwise. and the front seat should pull off. Once you remove the front seat there are two releases to remove the rear seat.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
cordoba 2001 19 sdi
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.
the jack handle is located under the front seat
1) Remove the back seat (pillion seat) 2) Then remove the screw that holds the front seat ( its in the middle), with a philips screwdriver/ allen key 3) lift out the front seat and locate the battery