Want this question answered?
Pull the complete headlight assembly out to get to the bulbs. You first have to pull the front bumper off, along with the wheel well to get to the headlight assembly.
Remove tire & inner liner to gain access to head light assembly
Open the hood. On top of the headlight assemblies, there's a curved metal rod. Pull that out, and you can pull the headlight assembly right out. From there, you turn the bulb ballasts counterclockwise and pull them out, and you can either replace the bulbs at that point, or the whole headlight assembly if necessary.
My daughter has a 2002, and you must take it to the dealer, so we were told.
The headlight on your 2008 Hyundai can be removed by removing the headlight retaining bolts from the inside of the engine compartment. Remove the wiring harness and replace with a new headlight.
Not an easy task since you have to remove the Front Bumper Cover to get access to it. Once that's done, remove the electrical connectors, the screws and the Headlight Assembly.
Page 405 in your owner's manual.
See "Headlight" on page 52 of chapter 11 "Maintenance and Service" in your "OWNER'S MANUAL".....
Open your hood and remove the 2 push pins that connect the engine compartment plastic separator. There are also 2 bolts to remove and then you can pull the headlight from the frame. Replace the bulb and put the headlight back.
Where is PVC valve located on 2008 Taurus
For my 2008 528i there is a housing under the hood that holds the assembly that the bulb plugs in. The housing is located directly behind the low beam location under the hood. Remove the cover and be sure not to loose the gasket to prevent water from damaging the bulb. Twist the bulb assembly to access the bulb. Replace the faulty bulb and replace it with a H7 from any auto parts store. Now replace the bulb assembly into the headlight housing and turn to the right. Replace the cover and you are done! And you probably saved some $$$
you have to replace the whole assembly