One of the easiest methods of separation is filtration. You can try this by pouring the mixture through ordinary filtration paper into a container, but this will only work if it is a suspension or colloid, it will not work with a solution.
If it is a solution, try evaporation or distillation. Once all the solvent has evaporated you will see bluish green crystals of copper sulfate.
Cuz it's copper sulphate
You can boil the solution and collect and condense the water vapor until all of the water is gone. That will leave you with the solid copper sulphate. You will have to let the copper sulphate dry to remove all of the water.
Use a magnet to remove the iron filings from the mixture, then mix the remaining components with water. The copper sulfate will dissolve but the CaCO3 (chalk powder) will not. Filter the mixture to remove the chalk, then boil the water to recover the copper sulfate.
Dissolve in water and crystallize once more. The resulting crystals will be purer, while the remaining solution will comprise of the dopants + copper sulphate
Increasing the temperature the solubility increase, also the dissolution rate.
Cuz it's copper sulphate
well here's a hint - copper sulphate is soluble in water, but calcium carbonate isn't.
You can boil the solution and collect and condense the water vapor until all of the water is gone. That will leave you with the solid copper sulphate. You will have to let the copper sulphate dry to remove all of the water.
It turns into a white powder and when water is then again added to the deydrated copper sulphate it turns back to its original colour
it changes colour from a white powder to a blue powder
Use a magnet to remove the iron filings from the mixture, then mix the remaining components with water. The copper sulfate will dissolve but the CaCO3 (chalk powder) will not. Filter the mixture to remove the chalk, then boil the water to recover the copper sulfate.
Copper Sulphate mixed with hot water makes Copper Sulphate Crystals.
Dissolve in water and crystallize once more. The resulting crystals will be purer, while the remaining solution will comprise of the dopants + copper sulphate
Increasing the temperature the solubility increase, also the dissolution rate.
copper sulphate gets hydrated in water and thus is diffusible.
No. All metal sulphate are soluble in water, except barium sulphate, calcium sulphate and lead sulphate.
copper sulphate is soluble.dissolve the two in water whereby cuso4 dissolves.filter the mixture the put the filtrate in an evaporating dish to evaporate excess water.do not evaporate to dryness coz some water ir required for crystalization.