0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Keypad lock function does not work?
Fuse #63 is blown. It's the only one on the back of the fuse box.
How do you reset the circuit breaker on the cigarette lighter on a 63 ford falcon?
It does not have a circuit breaker. It uses a fuse to protect the circuit. Look for a blown fuse in the fuse panel under the dash on the drivers side.I believe the cigarette lighter circuit is protected with a glass barrel fuse not a circuit breaker. Check the fuse box for a blown fuse.
Can someone tell me where the fuse is located for the central locking system on the Ford Focus?
Under the bonnet there is a fuse bow near the bulkhead. Fuse number 63 is central locking. Its a 20 amp fuse.
Where is fuse 63 on a 2000 Ford Focus?
Fuse 63- central lock module - is located on the back of the passenger compartment fuse panel. You need to remove the panel to access the module and fuse.
Where is number 63 fuse on a Ford Focus?
It is on the fuse panel located under the dashboard on the drivers side - FUSE 63 is located on the BACK of the fuse panel (as you look at it). The panel must be un-fastened - then you can turn it around to gain access to it. A VERY poor design! Good luck
Can you tell you if your Winchester model 63 is pre 1964?
Production of the Model 63 ended in 1959.
Which fuse for wing mirrors on Mercedes 240 elegance 2002?
21, 22, 63
What size fuses are used in a 63 Pontiac Starchief with ac?
The 63 Pontiac used a 30 amp fuse inline which connected to the battery terminal of the alternator for the A.C. There is also 20 amp fuse in the fuse box labeled HEATER. These cars also used a Master Relay and a High speed Blower Relay. Did this answer your question or were you asking for all the fuses in the fuse box?
Why does fuse number 63 keeping blowing on 2000 Ford Focus estate?
The primary purpose of a fuse is to help protect a circuit from damage in the event of a short or overload. The fuse is protecting the wiring as well as the device. The primary reason a fuse fails, for at least a second there was a short circuit to ground that caused the fuse to blow. Always replace failed fuses with the proper amp fuse, not doing so can result in electrical system damage. Possibly you have too small a fuse installed. Always replace fuses with the manufactures recommended amperage. If the new fuse blows immediately you have a shorted circuit somewhere in that wiring system. The most common cause of a short tends to be when a piece of wire has a small exposed area that is bare. This piece of bare wire can often rub against metal and create issues for the electrical system because of the sudden surge in electrical current. While there can be numerous causes for a blown fuse, the majority of the causes of a blown fuse tend to be quite simple to repair. Once the failed wire is located the solution usually takes only a few moments to correct. Usually something as simple as repairing a bare wire. The other reason a fuse may blow is because the circuit is overloaded. This would happen if you have added accessories to the circuit. Of course a short in the device the fuse protects will cause a blown fuse.
What cable will you need to run a 63 amp fuse?
6awg/2C in shielded tech cable if it is to be exposed.
Where is fuse number 63 on a 2000 Ford Focus SE?
It's "hidden" - mounted on the REVERSE side of the dashboard fuse panel which is located under the dash to the left of the steering column. You must unfasten the fuse panel and drop it so that you can get to the fuse on the back.
What number divided by 7 equals 63?
To find out the answer to your question, do 63 times 7. If you are not sure if the quotient you got was correct, then divide it by seven. The dividend should be 63. I'll tell you the answer; It is 441.
