Want this question answered?
Dayton Knock Off Wire Wheels have a "Dayton Logo" on the center hubshell with a serial number that can be registered with Dayton Wire Wheel in case of theft. There is also a "Dayton Logo" on the outside lip of the rim across from the valve hole. Dayton Wire Wheels have "Load Rating" stickers on the tire side that say Dayton Wire Wheel. The adapters are chrome plated and the Knock Off caps have "Dayton" and a part number in the back side of the cap. Dayton Wheels also have highly polished stainless steel spokes that never rust. The wheels are made in Dayton, Ohio and last but not least is the 3 year warranty that comes with all the Dayton Wire Wheels. The "Cheap Copy" wire wheels are made in China with little or no warranty, Parts that fit loosly, very thin chrome on the rim and spokes, causing the wheel to rust in a short period of time. Parts such as caps and adapters are hard to find as many of the companies that sell the products are no longer in business.
YES
If the voltage between real ground and the ground wire is not 0.0000 Volt, then the wire is not grounded properly.
The Model T was never produced with wire wheels. From 1908 to 1925 it came equipped with wooden artillery wheels. In 1926 it was changed to steel spoke wheels.
This applies to all 1979-1985 GM E-bodies: Steel wheels were 15x6, not sure of the width on the aluminum or real wire wheels. The bolt pattern on all wheels is 5x4.75in. (120.7 mm)
There are few brands of wire shelving that have wheels. Some of them are SI brand, plumber surplus, metro, staples brand, chrome wire shelving and many more.
Yes, just reverse the start winding circuit.
if it is a 240volt motor it does not matter,
dayton
The duration of The Tell Tale Wire is 1200.0 seconds.
Mark could hot wire anything that had wheels.
you could have a wire broke in the tire