0
How can you tell if you have 202 heads without taking them off the engine?
Wiki User
∙ 13y ago
202 heads are double hump and the regular small block has single hump.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How can you tell if your heads are bad on a CHEVY 305 engine?
take them to a machine shop
How can you tell the difference between a 327 engine and a 350 engine?
Very hard to tell without pulling a head and measuring the stroke, but there are some signs that might help. If the factory intake has an oil filler tube and there are no bolt holes in the ends of the heads, it's probably a 327.
How do you get the engine light go off on a 2003 Silverado without taking it to the dealership?
You will need an OBD2 code reader. They can be found at most auto parts stores. It will tell you why it set off the engine light, and usually allow you to clear the fault codes.
Is cylinder 1 at the front of motor?
#1 is the cylinder closest to the front of the engine (where the belt is). On a V engine that is harder to tell unless you can see both heads at the same time.
Hi can you tell you if the 1975 Corvette L48 had aluminum heads and and if it was a four bolt main?
The 1975 L48 Corvette engine was the "base" engine and never was offered with aluminum heads or a 4-bolt main block from the factory. The L82, offered in 1975 had 4-bolt mains but still only had cast iron heads.
What size heads on 350 89 camaro?
Your question is a little vague, so im assuming you're asking which is better between 350 and 305 heads. Many people will tell you it doesnt matter. I think if you have a 350 engine then you should use 350 heads. the 305 heads will have higher compression, which will make the car louder, and somewhat faster, however, if you use 305 heads on a 350 engine then you should use a high octane fuel, so it will be better on your engine. Only use 305 heads if you know what your doing. if not you should probably stick with 350 heads. i hope that answered your question.
Odometer stop working is it a cable or gear?
No way to tell without taking it apart.
Is there a difference in torque specs between aluminum and iron heads?
Yes there is. I would tell you what thay are, But I need to know the year and what size engine.
So i want to stop my clozapine and is there a way for the doctor to tell if i really took it or not?
It is not advised that you stop taking your clozapine without your doctor's approval. A urinalysis can tell if you have been taking your medication by the levels that are present in your system.
How do you tell if your timing belt needs to be changed?
You cannot tell by looking at it. For this reason it must be changed at a set time period of miles or years. Without knowing the make, model, engine, & year I cannot tell you when it should be changed. Warning: If the engine is an interference engine and the belt breaks you will have internal engine damage.
What causes engine surging?
It could be as simple as a vacuum leak but without knowing what year, make, model and engine it is hard to tell you what it may be.
How do you tell if you have an ulcer without consulting a doctor?
you will know that you have ulcer without consulting a doctor by feeling pain before and after taking in solid or liquid foods.
